HOMEAMSMTSMIMMETALALLOYOXIDECARBIDENITRIDEBORIDETELLURIDESILICIDESULFIDESELENIDEFLUORIDENANO
Home  >  News  >  100 Mesh to Micron Conversion

100 Mesh to Micron Conversion

100 mesh refers to the number of mesh holes per inch of the sieve. It is a sieve used for screening coarse powders, medium powders, and interval powders. 100 mesh is the most common and widely used standard sieve. After sieving through a 100 mesh sieve, the powders are divided into two parts: one is the powder above the 100 mesh sieve (It is represented as: +100 mesh), and the other is the powder below the 100 mesh sieve (It is represented as: -100 mesh).

Analysis of 100 Mesh to Micron

In theory, 100 mesh corresponds to 149 μm. - 100 mesh means that the majority of powder particles is less than 149 μm. However, due to the different morphologies of powder particles (spherical, irregular, flaky, elliptical, dendritic). This leads to significant differences in the particle size distribution of the screening results. Based on Fushel's experience, if it is a spherical powder with -100 mesh, more than 80% of the powder particles are smaller than 149 μm. If it is irregular powder, only 60% or lower is less than 149 um.

100 Mesh to Micron Conversion Table

Therefore, based on years of experience in powder screening, Fushel conducted a further analysis about the distribution of 100 mesh of different shapes. The details are as follows:
ASTM TYLER Microns Shape
100 Mesh 100 Mesh 149 um /
-100 Mesh -100 Mesh <149 um (≥80%) Spherical
-100 Mesh -100 Mesh <149 um (≤70%) Ellipsoidal
-100 Mesh -100 Mesh <149 um (≤60%) Flaky
-100 Mesh -100 Mesh <149 um (≤60%) Irregular
+100 Mesh +100 Mesh >149 um (≥90%) Spherical
+100 Mesh +100 Mesh >149 um (≥90%) Ellipsoidal
+100 Mesh +100 Mesh >149 um (≥90%) Flaky
+100 Mesh +100 Mesh >149 um (≥90%) Irregular

The above only provides further explanation and analysis on the conversion of 100 Mesh to Micron. For more Mesh to Micron Conversions, Pls go to the following page:

Mesh to Micron Chart

https://www.fusnano.com/news/mesh-micron-conversion-chart.html

40 Mesh to Micron Conversion

https://www.fusnano.com/news/40-mesh-to-micron-conversion.html

200 Mesh to Micron Conversion

https://www.fusnano.com/news/200-mesh-to-micron-conversion.html
Previous:200 Mesh to Micron Conversion
Next:      Return

Latest News

Hunan Fushel Technology Limited
Room 1842, Block B, No.858 Dujuan Road, Yuelu District, Changsha, Hunan 410205, China
Tel.: 86 731 8974 7657           Email: sales@fusnano.com
Copyright © 2022 FUS NANO  Sitemap
FUS NANO

Sales
86 17377 877 377
sales@fusnano.com
Wechat: fus360

Email: sales@fusnano.com    INQUIRY